|
| | | Amphenol has long been the leader in providing high performance rectangular connectors and systems. Starting with the development of the B3 (Bristle Brush Bunch, or commonly referred to as the Brush) contact, incorporated into the low mating force PCB connectors, and then later the development of the line replaceable module (LRM), Amphenol has led the way in the avionics packaging industry for high quality rectangular products. 
- Exceeds many MIL-DTL-38999 performance requirements
- Utilizes Amphenol’s low mating force brush contacts
- 0.100” x 0.100” square grid footprint
- Load bearing shells (supports module to rack interface)
- Tapered connector mating surfaces provide near zero X-Y plane movement between mated connectors.
- EMI/ESD protection in both connector halves:
- EMI at mounting surfaces and connector interface (38999 III level)
- ESD features allow use of Class 3 hardened chips (4KV max. voltage)
- Signal speeds to 3.125 Gbps - (per differential pair and based on intelligent assignment of ground/signal pairs)
- Capable of 500 mating cycles
- Water tight seals both at connector interface and to mounting surfaces
- “Hybrids” available - combining signal contacts with power or RF contacts
|
 | - Exceeds many MIL-DTL-38999 performance requirements
- Utilizes Amphenol’s low mating force brush contacts
- 0.100” x 0.100” square grid footprint
- Load bearing shells (supports module to rack interface)
- Tapered connector mating surfaces provide near zero X-Y plane movement between mated connectors.
- EMI/ESD protection in both connector halves:
- EMI at mounting surfaces and connector interface (38999 III level)
- ESD features allow use of Class 3 hardened chips (4KV max. voltage)
- Signal speeds to 3.125 Gbps - (per differential pair and based on intelligent assignment of ground/signal pairs)
- Capable of 500 mating cycles
- Water tight seals both at connector interface and to mounting surfaces
|  |
| 
完整型錄 
完整型錄 
完整型錄 |
|
